Embedded LPC3250 Guia do Utilizador descarregar pdf (Página 23)

LPC3250 Developer’s Kit v2 - User’s Guide

Page 23

4.10 SP7: I2C Peripherals

There are several I2C peripherals on the board. See picture below for locating the different

components on the board. The I2C addresses for the individual components are given in the

schematic.

 Configuration E2PROM, 64kbit. This chip contains version information about the OEM Base

Board.

 LM75 Temperature sensor.

 3-axis Accelerometer (MMA7455). Note that the two interrupt outputs are not connected but

available on JP5.

 Port expander (PCA9532) with 8 LEDs and 4 pushbuttons. The Card Detect and Write Protect

signals from the SD/MMC memory card connector are also connected to this chip. LED22/23

are positioned above SW2, LED24/25 are positioned above SW3, LED26/27 are positioned

above SW4 and LED28/29 are positioned above SW5.

Figure 9 – I2C Peripherals

Signals

LPC3250

I2C-SDA

I2C1_SDA (channel#1)

I2C-SCL

I2C1_SCL (channel#1)

Config E2PROM

Port Expander

Temp Sensor

Accelerometer

U10

Push-buttons

left to right: SW2/SW3/SW4/SW5

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

Sem comentários

Embedded LPC3250 Guia do Utilizador Página 23