Embedded 4/8/16-CH Manual do Utilizador descarregar pdf (Página 15)

4/8/16-channel H.264 DVR User Manual

2.4.6 Start Cruise

PTZ preset start cruising capabilities. (right click again to opt out cruise)

Note: This feature can only be valid after set up PTZ control parameters and

preset points.

2.4.7 PTZ Control

Click right button in main interface and select “PTZ control”, following interface will

pop-up:

PTZ speed (fast or slow) can be controlled in this interface, zoom, focus and aperture is

also controllable.

Cruise setting:

Step 1 Select the PTZ channel

Step 2 Set the retention time (s)

Step 3 Adjust the arrow keys to the position which need to be monitored

Step 4 Press SETTING POINT .Repeat steps 2-4 to set the second location

Step 5 Select the APPLY button to save the settings

----END

Note: 1, If you need to set up more points, repeat steps 2-5

2, to view the point has been set, in the current point enter the number, select SLIP 3,

to delete the point has been set, enter the number, select delete

2.4.6 MUTE

2.4.7 Manual recording/stop recording

If “timing record” is on (please see Chapter 3), and recording is not set in this period,

"manual recording" and "timing record" is effective. When boot-record mode is on, this

function is not available.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Sem comentários

Embedded 4/8/16-CH Manual do Utilizador Página 15